Controllers, Receivers and Wall Plates
From remote controls, wall plate touch panels and dimmable drivers, the Applelec Supply team have a variety of quality, high-tech, control systems to match your project needs.
LTech M1+M3-3A Remote Control Dimmer With RF Receiver
The remote uses a radio frequency of 433.92 MHz, with a reach of up to 50m. Features include an on/off button, the ability to save and recall two light levels, a touch sensitive dimmer wheel and a 30 second delay before turning the light off.
This remote dimmer operates on a low voltage 12~24V DC circuit, providing a PWM output for dimming LEDs.
LTech M5+M3-3A CCT Remote Controller With RF Receiver
Radio Frequency CCT remote controller.
The remote uses a radio frequency of 433.92 MHz, with a reach of up to 50m. Features include an on/off button, CCT dial, brightness/dimming buttons and a mode button for selecting effects: jumping, fading, cycling.
The CCT controller operates on a low voltage 12~24V DC circuit, providing a PWM 2 channel output, ideal for dimming LEDs.
LTech M3+M3-3A RGB Controller With RF Receive
Radio Frequency RGB remote colour controller.
The remote uses a radio frequency of 433.92 MHz, with a reach of up to 50m. Features include an on/off button, colour wheel, brightness/speed buttons and a mode button for selecting effects: jumping, fading, cycling.
The colour controller operates on a low voltage 12~24V DC circuit, providing a PWM 3 channel output, ideal for controlling RGB LEDs.
LTech M4+M4-3A RGBW Controller With RF Receiver
Radio Frequency RGBW remote colour controller.
The remote uses a radio frequency of 433.92 MHz, with a reach of up to 50m. Features include an on/off button, ‘W’ button for White control, colour wheel, brightness/speed buttons and a mode button for selecting effects: jumping, fading, cycling.
The colour controller operates on a low voltage 12~24V DC circuit, providing a PWM 4 channel output, ideal for controlling RGBW LEDs.
LTech M4+M4-5A RGBW Controller With RF Receiver
Radio Frequency RGBW remote colour controller.
The remote uses a radio frequency of 433.92 MHz, with a reach of up to 50m. Features include an on/off button, ‘W’ button for White control, colour wheel, brightness/speed buttons and a mode button for selecting effects: jumping, fading, cycling.
The colour controller operates on a low voltage 12~24V DC circuit, providing a PWM 4 channel output, ideal for controlling RGBW LEDs.
LTech M8+M4-3A RGBW Controller With RF Receiver
Radio Frequency RGBW remote colour controller.
The remote uses a radio frequency of 433.92 MHz, with a reach of up to 50m. Features include an on/off button, six preset colours, seven bespoke colours, individual red-green-blue and white dimming buttons for mixing colours, brightness/speed buttons and buttons for selecting effects: jumping, fading, cycling.
The colour controller operates on a low voltage 12~24V DC circuit, providing a PWM 4 channel output, ideal for controlling RGBW LEDs.
LTech M8+M4-5A RGBW Controller With RF Receiver
Radio Frequency RGBW remote colour controller.
The remote uses a radio frequency of 433.92 MHz, with a reach of up to 50m. Features include an on/off button, six preset colours, seven bespoke colours, individual red-green-blue and white dimming buttons for mixing colours, brightness/speed buttons and buttons for selecting effects: jumping, fading, cycling.
The colour controller operates on a low voltage 12~24V DC circuit, providing a PWM 4 channel output, ideal for dimming LED’s.
LTech E1 Single Zone PWM Touch Panel Dimmer
Wall mounted touch panel dimmer, wired PWM output.
The touch panel requires a low voltage input. Input and output is via screw terminals on the back of the unit. Features include an on/off button, the ability to save and recall a light level, a touch sensitive dimmer bar, ‘up’ and ‘down’ brightness buttons.
Low voltage LED strip can be wired directly into the PWM output on the back of this switch.
Compatible with standard UK and European wall switches. Back boxes must be at least 26mm deep, back box is not included. Metal back boxes shield the wireless signal so plastic boxes must be used when using an additional WiFi controller.
The touch panel dimmer operates on a low voltage 12~24V DC circuit, providing a PWM output, ideal for dimming LED’s.
LTech E2 Single Zone PWM Touch Panel CCT Controller
Wall mounted touch panel CCT controller, suitable for controlling one zone of lighting.
The touch panel requires a low voltage input. Input and output is via screw terminals on the back of the unit. Features include an on/off button, the ability to save and recall a light level, a touch sensitive CCT bar and brightness/dimming buttons.
Compatible with standard UK and European wall switches. Back boxes must be at least 26mm deep, back box is not included.
The touch panel dimmer operates on a low voltage 12~24V DC circuit, providing a PWM output, ideal for dimming LED’s.
LTech E4S Single Zone PWM RGBW Controller
Wall mounted touch panel controller, suitable for controlling one zone of RGBW lighting.
The touch panel requires a low voltage input. Input and output connection is via screw terminals on the back of the unit.
Features include an on/off button, touch sensitive colour wheel, colour scroll, jump and fade modes, dimming and speed adjustment.
Compatible with standard UK and European wall switches. Back boxes must be at least 26mm deep, back box is not included.
The touch panel controller operates on a low voltage 12~24V DC circuit, providing a PWM output, ideal for dimming LED’s.
LTech EX1S Single Zone RF/DMX Touch Panel Dimmer
Wall mounted touch panel, suitable for synchronised dimming of white or single colour lighting.
The touch panel requires mains voltage input. The output is an RF signal sent to ‘F4-5A’ zone receivers (available separately). Alternatively a DMX wired signal can be used with DMX zone receivers. Multiple receivers can be connected with this dimmer; wireless or DMX. Input and output connection is via screw terminals on the back of the unit.
Features include an on/off button, the ability to save and recall a light level, a touch sensitive dimmer bar, ‘up’ and ‘down’ brightness buttons and 4 preset brightness levels: 25%, 50%, 75%, 100%.
Compatible with standard UK and European wall switches. Back boxes must be at least 26mm deep, back box is not included. Metal back boxes shield the wireless signal so plastic boxes must be used when using the wireless output.
LTech EX2 Single Zone RF/DMX CCT Controller
Wall mounted touch panel controller, suitable for synchronised control of CCT lighting.
The touch panel requires mains voltage input. The output is an RF signal sent to ‘F4-5A’ zone receivers (available separately). Alternatively a DMX wired signal can be used with DMX zone receivers. Multiple receivers can be connected with this controller; wireless or DMX. Input and output connection is via screw terminals on the back of the unit.
Features include an on/off button, the ability to save and recall a light level, a touch sensitive CCT bar and brightness/dimming buttons
Compatible with standard UK and European wall switches. Back boxes must be at least 26mm deep, back box is not included. Metal back boxes shield the wireless signal so plastic boxes must be used when using the wireless output.
LTech E4S Single Zone PWM RGBW Controller
Wall mounted touch panel controller, suitable for controlling one zone of RGBW lighting.
The touch panel requires a low voltage input. Input and output connection is via screw terminals on the back of the unit.
Features include an on/off button, touch sensitive colour wheel, colour scroll, jump and fade modes, dimming and speed adjustment.
Compatible with standard UK and European wall switches. Back boxes must be at least 26mm deep, back box is not included.
The touch panel controller operates on a low voltage 12~24V DC circuit, providing a PWM output, ideal for dimming LED’s.
LTech EX4S Single Zone RF/DMX RGBW Controller
Wall mounted touch panel controller, suitable for synchronised control of RGBW lighting.
The touch panel requires mains voltage input. The output is an RF signal sent to ‘F4-5A’ zone receivers (available separately). Alternatively a DMX wired signal can be used with DMX zone receivers. Multiple receivers can be connected with this controller; wireless or DMX. Input and output connection is via screw terminals on the back of the unit.
Features include an on/off button, touch sensitive colour wheel, colour scroll, jump and fade modes, dimming and speed adjustment.
Compatible with standard UK and European wall switches. Back boxes must be at least 26mm deep, back box is not included. Metal back boxes shield the wireless signal so plastic boxes must be used when using the wireless output.
LTech EX8S Multi Zone RF/DMX RGBW Controller
Wall mounted touch panel controller, suitable for controlling up to four zones of RGBW lighting.
The touch panel requires mains voltage input. The output is an RF signal sent to ‘F4-5A’ zone receivers (available separately). Alternatively a DMX wired signal can be used with DMX zone receivers. Multiple zone receivers can be connected per zone, whether they are wireless or DMX. Input and output is via screw terminals on the back of the unit.
Features include an on/off button, touch sensitive colour wheel, colour scroll, jump and fade modes, dimming and speed adjustment, scene save and recall, zone selection.
Compatible with standard UK and European wall switches. Back boxes must be at least 25mm deep, back box is not included. Metal back boxes shield the wireless signal so plastic boxes must be used when using the wireless output.
LTech F1 Single Zone Remote Control Dimme
This item is the remote control only, no receiver is included. It is designed to be used together with a wireless receiver (F4-5A) or a single zone touch panel controller (E1S, EX1S), available to buy at the bottom of this page.
Casambi CBU-PWM4
CBU-PWM4 is a Bluetooth controllable, Casambi enabled four channel PWM dimmer for constant voltage LED loads, such as LED strips and constant voltage LED modules. It is connected between a 12-24 VDC power supply and the constant voltage LED load.
eldoLED LINEARdrive 180D
LINEARdrive 180D is a constant voltage LED driver. It features four LED outputs that can be controlled individually via DMX.
You can configure the driver over its intuitive, 3-button user interface with display: it lets you configure the number of channels, DMX settings for networked mode and show, colour and dim values for standalone operation.
The driver features wire restraints which make it perfectly suited for independent installations.
eldoLED LINEARdrive 720D
The LINEARdrive series from eldoLED are a family of constant voltage LED drivers with a 4-24 A output. LINEARdrive LED drivers are available with DALI, DMX or 0-10V compatibility. They can be used for white, dynamic white and full colour lighting applications.
These eldoLED LED drivers are highly integrated, enclosed and easy to configure, with up to 4 independently controllable LED outputs. Designed for low power, indoor LED lighting applications, the LINEARdrive LED drivers can be integrated in a network or used as standalone devices. eldoLED's ShowMaster software allows you to upload show sequences for use in standalone mode. Create and manage your own sequences using the TOOLbox (sold separately) and freely available PC software.
Need a sign to go with your LEDs?
Did you know...
We are also a trade manufacturer of bespoke signage solutions. With almost 30 years of sign making experience, we can comfortably say we know a thing or two about signage. Coupled with our 6-acre factory and a dedicated team of talented individuals, we pool together our unrivalled expertise, technical knowledge and craftsmanship to deliver high quality, precision manufactured, products, including:
Flat Cut Letters | Built Up Letters | LED Neon | Halo Illuminated Letters | Cabochon Letters | Face Lit | Rim & Return | Block Acrylic | Sign Trays | Fascia's | Projecting | Totems | Display frames | ECO Signage and more...